|
Detailed Specifications: Airborne Industrial Wireless Device Servers
LAN Interface
10/100 Base T (IEEE 802.3) auto-negotiation,auto MDI/MDIX and RJ-45 Ethernet
connector
Wireless Specifications
Technology: IEEE 802.11b DSSS, WiFi Compliant
Frequency: 2.4 – 2.4835 GHz (US/Can/Europe/Japan), 2.471-2.497
Ghz (Japan)
Channels:
USA & Canada: 11 channels
Europe: 13 channels
Japan: 14 channels
France: 4 channels
Data Rates Supported: 11, 5.5, 2, 1 Mbps
RF Power:
65 mW (Typical)
+19.3 dBm peak (85mW) at 802.11b data rates
+15 dBm average (32mW) at 802.11b data rates
+21.5 dBm peak (141mW) at 802.11g data rates
+12 dBm average (16mW) 802.11g data rates
Sensitivity:
-82 dBm @ 11Mbps
-86 dBm @ 5.5 Mbps
-88 dBm @ 2
Mbps
-90dBm @ 1 Mbps
-71dBm @ 54 Mbps
-77dBm @ 36 Mbps
-83dBm @ 18 Mbps
-85dBm @ 11 Mbps
-87dBm @ 1 Mbps
Security: Supports 64-bit and 128-bit WEP and WPA (TKIP/MIC) privacy
protocols
Antenna: 2.2 dBi Rubber Duck Antenna, supplied and attached to
RP-SMA bulkhead connector
Device Server Specifications
Serial Interface: RS-232 or RS-232/422/485
Each port is a fully independent asynchronous DTE serial port, with:
- Full modem control
- Hardware flow control
- Optional 10-pin RJ-45 adapters for DB-9M connections are available
Data Rate: Speeds of up to 921.6 Kbps, depending on flow control
protocols used, cable length and condition, and other factors. learn
more about max data rates
Serial Connectors: Standard DB-9 male (see
connector pinout)
Surge Suppression Option (standard on 5V models): Surge suppressor
applied to each line that is capable of sustaining up to 40A peak, 8 x
20µs transient surges, a clamping voltage of 30V (RS-232 mode) or
15.5V (RS-422/485 mode), and a peak energy dissipation of 0.1 Joules
Protocols and Software:
Management Protocols: UDP, TCP/IP, HTTP, DHCP, ARP, SNMP
Initial IP address configuration: DHCP, static IP set within the Installation
Wizard or a custom UDP datagram utility (with command line interface)
for unattended installations
Communication modes: Normal, Tunneling, Raw TCP, Auto TCP, Raw UDP or
Intellisock TCP socket services
Quatech provides several ways to manage, monitor and configure wireless
device servers after installation:
- Windows® Device Manager (Quatech Device Manager in Windows NT)
- On-board HTML pages accessible from a standard web browser
- Simple Network Management Protocol (SNMP)
- Intellisock™ TCP socket services
OS Support:
Device drivers provided for Windows NT, Windows
2000, Windows XP, and Linux
Raw TCP, Raw UDP, Tunneling, AutoTCP and
IntellisockTM modes are O/S independent
Power:
Power Supply: +5V, 2A (10 W) max DC, with
auto-sensing AC adapter provided for 100VAC–240VAC, 50Hz–60Hz
operation
Typical power consumption: +5V, 0.7A
(3.5W)
Hardware:
Conexant Prism™ 3 Wireless Chipset
CPU: Freescale™ PowerPC®
SDRAM: 8 MB
FLASH Memory: 2 MB (FLASH is field upgradeable)
+5V models limited to 500mA max current draw per port (fuse-protected)
Environment:
Operating: 0°C to 70°C
Storage: -40°C to 70°C
Relative Humidity: 10% to 90% non-condensing
Dimensions:
Length: 4.69” (11.91 cm)
Width: 3.33” (8.46 cm)
Depth: 1.18” (2.99 cm)
Weight: 15.1 oz. (428.0 g)
Accessories:
Surge Suppression
DB-9 to RJ-45 Adapters
International Power Cords
DIN Rail Mounting Kit
RS-422 & 485 Termination Blocks
Certifications: CE, FCC Class B, Wi-Fi
Sales Information:
|
