Detailed Specifications: RS-232/422/485 Serial Device Servers

LAN Interface: 10/100 Mbps auto-detecting--10 Base T, 100 Base TX, RJ-45 Ethernet connector

Serial Interface: SSE-410D: One RS-232, RS-422, or RS-485, DIP switch selectable
Serial Interface: DSE-410D: One RS-232, RS-422, or RS-485, DIP switch selectable, one RS-232

Serial Connectors: DB-9 male DTE configuration

Serial Memory: 8K bytes per serial port

Data Rate: 110 bps to 230.4 kbps

Supported Signals:
       RS-232: TX, RX, RTS, CTS, DTR, DSR, DCD, GND
       RS-422: TX+, TX-, RX+, RX-, RTS+, RTS-, CTS+, CTS-, GND
       RS-485: Data+, Data-

OS Support: Windows 98/Me/NT/2000/XP

Operation Modes: Virtual COM port (Windows only), TCP/IP socket and tunneling, UPD/IP socket and tunneling (socket and tunneling modes not O/S dependent)

Protocols: TCP, IP, ARP, DHCP, Telnet, HTTP, UDP, ICMP

Management: Windows® Configuration Manager Utility, Serial Console, Telnet, Upgradeable Firmware

Heartbeat Connection: TCP port 5300 is reserved for the Heartbeat connection--a feature providing automatic resumption of the TCP data connection in cased of a power failure or loss of an Ethernet connection on either the client or server.                     

Power Requirements:
      12 VDC @ 200mA
      110VAC to 12 VDC 500mA power supply included for North America
      Power supplies for Europe, UK, and Australia also available 

Environment:
       Operating: 0°C to 50°C
       Storage: -20°C to 60°C
       Humidity: 0% to 90% non-condensing

Dimensions: 3.35" x 4.5" x .9" (8.5 x 11.5 x 2.3 cm)

Certifications: CE, FCC Class B

Return to Main Product Page